Are you looking for ways to fix a corrupted hard drive? You are on the right page as we are going to recover data from damaged/broken/corrupted hard drive here.
• Filed to: Hard Drive Recovery • Proven solutions
Data loss is something that every user has to face at some point in his/her life. Sometimes, you lose random files that do not matter whereas sometimes you lose important files. Mostly, the reason for data loss in hard drives is file corruption. And it is essential that you know how to recover files from the corrupted hard drive.
So, in this guide, we are going to explore the ways that will allow you to perform corrupted hard drive recovery as quickly as possible. Let's begin with the problem.
There are many instances where users have to face data loss conditions and they can't figure out what caused data loss. But when the hard disk gets corrupted, the problem is preceded by other issues like system shutdowns, blue screen of death errors, and other program crashes. Because of the file damage, you won't be able to carry out several processes properly. Some other symptoms that you will notice when the hard drive is corrupted are mentioned below:
If you notice any of these symptoms, don’t panic. Try not to write data to the hard drive unless the problem is resolved. It could affect the chances of data recovery for you.
If you want to recover data from broken hard drives, then we have the perfect tool for you. The best data recovery tool available in the market is Recoverit (IS). It doesn't matter how you might have lost your important files, iSkysoft can get it back with just one click. This software has advanced features and improved recovery rates so that you can sit back and relax even if you lost your data.
The Recoverit (IS) tool features are listed below:
Here is the detailed guide to using the corrupted HDD recovery tool in a simple way. Just follow the steps.
Start by downloading the software from the official website and install it properly. Launch the program and then connect your hard drive with the system.
In the home interface, specify the location from where you lost the data and click on the "Start" button.
The software will scan the entire drive to look for lost, deleted, or damaged files. The results will be displayed on the screen. You can further filter the results according to the file type and file path.
If you found the lost files before the scan was complete, then you can stop the scan at any moment as well.
A good thing about iSkysoft is that you can have a preview of the files that you want to recover. This makes everything easier as you can ensure that you have selected the right copy of the files.
Select as many files as you want, and then finally tap on the "Recover" option to get your files back. Keep one thing in mind though, never restore the lost files in the old location as it will corrupt or overwrite the data. Always keep the restored files in a new location.
You will be glad to hear that there are some ways that would recover corrupted flash drive data and files without formatting the entire drive. But you have to be more careful from now on. You will also have to repair the drive so that the same problem won't cause trouble for you again. Here is the top method that will work for you.
The worst thing that can happen to a drive is that it has bad sectors. After you have performed damaged hard drive recovery, it is time that you use the CHKDSK command. It will remove all the errors in the corrupted hard drive. This is how you can use the check disk command for repair:
Step 1 Open the Command Prompt by pressing the Win + X keys and make sure that you are running CMD as Admin.
Step 2 Type chkdsk and hit the Enter key to check the errors in the corrupted hard drive. Type chkdsk drive name: /f/r/x to fix the drive.
Once the drive repair is finished, you will be prompted to reboot your system so that the repair will start taking effect.
Yes, you can also use the File Manager to repair the disk drive as well. The steps are pretty easy and quick. So, after you recover data from corrupted hard drive, follow the steps to fix the non-system drive.
Step 1 Press Win + E keys and open the file manager and select the drive that is corrupted.
Step 2 Right-click on the drive and click on the Properties option. Select Tools from the window, go to Error Checking and click on the Check button.
Step 3 The issues present on the drive will be listed. Click on the Repair This Drive once the scan finishes and the drive errors will be repaired.
Fix the corrupted drive issue and you will be able to use the drive once again. Further, if you face a similar problem in the near future, then you'll know how to fix it.
In this guide, we learned how to recover data from the broken hard drive and to fix a broken hard drive. Using Recoverit (IS)y tool will make things easier for you. So, whenever you face data loss situations, you know on which tool you can rely upon. Get all your files back with just one click using iSkysoft.
Q1. What causes a corrupted hard drive?
Q2. Can corrupted hard drive be fixed?
Q3. How do I fix a corrupted C drive?
Q4. How long should a hard drive last?
Elva
staff Editor